Intended for side wall installation, the general purpose level switch package provides reliable liquid level detection with a 16A compact level controller for pump or valve control. The optional flash alarm brings attention to alarm conditions. Offered in two level sensor technologies, select the type and material based upon your application media. This liquid level switch package is widely applied in bulk storage and process tank level applications for high level control or low level control. Key benefits: Ideal for side wall tank mounting, relay output interfaces directly with valves, buzzers, alarms, etc. great for corrosive or coating liquids, add strobe for optional visual alarm. Accuracy: +/- 1mm in water. Repeatability: +/- 0.5mm in water. LED indication: Sensor, power and relay. Supply voltage: 120/240VAC at 50-60 Hz. Consumption: 0.25A maximum. Strobe type: Xenon tube. Strobe flash: (1) per second. Contact type: (1) SPST relay. Contact rating: 250VAC at 10A. Contact output: Selectable NO/NC. Contact delay: 0-60 seconds. Process temperature: -40 to 176 degree F, -40 to 80 degree C. Ambient temperature: -40 to 140 degree F, -40 to 60 degree C. Pressure: 150 psi (10 bar) at 25 degree, C, derated at 1.667, psi (0.113 bar) per degree C above 25 degree C. Enclosure rating: NEMA 4X (IP65). Enclosure material: PP. Conduit entrance: 1/2" NPT. Wetted material: PP. Process mount: 3/4" NPT. Mount gasket: Viton. Classification: General purpose. Compliance: CE.