The general purpose float level transmitter provides continuous level measurement up to 6.5' with a 4-20 milliampere signal output, and is factory configured to your selected dimension. This stainless steel liquid level sensor is well suited for high temperature or pressure tank level applications with relatively clean liquids such as water, diluted chemicals and light weight oils. Application examples include boilers and process vessels. Use in applications with foam or turbulence. Loop powered output will interface directly with PLC/SCADA or local display. Range: 12" to 6.5'. Accuracy: 0.25 percent span in water. Configuration: none, fixed span. Orientation: +/- 20 degree from vertical. Specific gravity: 0.55 minimum. Supply voltage: 10 to 30 VDC. Loop resistance: 600 Ohms at 24 VDC. Signal output: 4-20 milliampere, two-wire. Process temprature: -40 to 185 degreeF. Ambient temprature: -40 to 140 degree. Pressure: 200 psi. Enclosure rating: NEMA 4X (IP65). Enclosure material: polypropylene, UL94VO. Conduit entrance: Single, 1/2" NPT. Process mount: 2" NPT. Guide-float material: 316 stainless steel. Classification: general purpose. Compliance: CE. 42" Length.