Specification:
Product Name: 304SUS float switch
Body Length: 150mm
Material: 304 Stainless Steel
Max. Contact Rating: 10W
Max. Switching Voltage: 100V DC
Max. Breakdown Voltage: 220V DC
Max. Switching Current: 0.5A
Max. Carry Current: 1A
Max. Contact Resistance: 100mΩ
Operating Pressure: 10kg/cm
Max. Pressure: 0.2 Mpa
Applicable Proportion: 0.75
Operating Temperature: -10 ~ +120℃
Switch Operation: Reversible NO/NC
Wire: PTFE High Temperature Line
Installation Method: Vertical Mounting
Thread Diameter: M10
Package: 1x float switch
Application: for electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm.
The float level switch structure is designed and manufactured based on the principle of buoyancy and static magnetic field. The position of the float ball with the magnet (referred to as the float ball) in the measured medium is affected by buoyancy: the change in the liquid level causes a change in the position of the magnetic float. The magnet in the float and the sensor (reed switch) act to generate a switching signal.
Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contractor when it is connected by a load. Relay or contractor are not included here.