Plug in and leave the pump unattended for worry-free water removal. Ideal for crawl spaces, flat roofs, window wells and other problem areas around the home where water accumulates.
Troubleshooting:
Primary causes for malfunction impacting the automatic switching function:
o A clogged vent hole (small debris, seeds, pine needles)
o A contaminated switch housing (algae, slime or other materials accumulated on the switch underside).

Product Features

• I switch technology turns pump on and off by sensing the presence of water; removes water down to 3/8 in. Of surface
• 1/4 hp; max. Flow rate is 3000 gallons per hour; 1850 gph at 10 ft. Of discharge lift
• Can be left unattended to remove water
• Submersible reinforced sealed thermoplastic construction.Voltage:120V
• The water level must be at least 1-3/4 inches for the pump to cycle, prime, and operate. Water levels less than 1-3/4 inches will not allow the impeller to contact water therefore no water will be pumped. Garden hose adapter

Related Products:

Xnrtop 4M Cable Float Switch Water Level Controller for Tank Pump Water Level Controller Module DC 12-15V(AC 9-12V) Automatic Liquid Control Switch Module for Fish Tank Aquarium High and Low Liquid Level Controller with 2 Non-Contact Sensor Module Automatic Control Liquid Water Level Detection Tool 9V-12V AC/DC Liquid Level Controller Water Level Detection Sensor Drainage Pump Water Control Module